is there anyone use LC2s mix with biobizz nutes ?

[charlesweedmore]

hi

is there anyone use LC's soilless mix #1 with bio bizz nutrients ?

please give me your feeding chart.

 

[CannaDestroyer]

charles - search my posts or just type biobizz in the search, i have listed a complete recipe for biobizz in several posts. my soil mix is very similiar to lc's, so you should have no problems. in fact my recipe can be used on any soil/less mix that isn't prefertilized. if you buy soil that is, i.e. ocean forest, just feed plain water (ph adjust if not using lime) until plants show they are hungry, then begin my recipe. hope that helps.

 

[habeeb]

If there was a feed chart it's be reading your leaves, your plant will let you know what it wants.

 

[Mikeyk420]

If there was a feed chart it's be reading your leaves, your plant will let you know what it wants.

Now where's the chart on what to look for and what it means?

 

[habeeb]

Now where's the chart on what to look for and what it means?

http://www.icmag.com/ic/showthread.php?t=11688

this guy also did a book, called marijuana garden saver, and I believe rosenthal's new book will have a simlar section

 

[charlesweedmore]

charles - search my posts or just type biobizz in the search, i have listed a complete recipe for biobizz in several posts. my soil mix is very similiar to lc's, so you should have no problems. in fact my recipe can be used on any soil/less mix that isn't prefertilized. if you buy soil that is, i.e. ocean forest, just feed plain water (ph adjust if not using lime) until plants show they are hungry, then begin my recipe. hope that helps.

i cant find your post mate. can you give me the link ?

 

[pinecone]

i cant find your post mate. can you give me the link ?

Is this it CD?

For 5-gallons of water-solution to be used every watering:

Veg
- 3 tablespoons (45ml - 9ml per gallon or approx 2.4ml per liter) of BioGrow
- 3 tablespoons (45ml - 9ml per gallon or approx 2.4ml per liter) of Alg-a-mic

Flower
- 3 tablespoons (45ml - 9ml per gallon or approx 2.4ml per liter) of BioGrow
- 3 tablespoons (45ml - 9ml per gallon or approx 2.4ml per liter) of Alg-a-mic
- 3 tablespoons (45ml - 9ml per gallon or approx 2.4ml per liter) of TopMax
- 4.5 tablespoons (67.5ml - 13ml per gallon or approx 3.6ml per liter) of BioBloom

PH adjust to 6.3.

___________

This is actually not that far off of the BioBizz feeding chart for their "light" mix (found here - http://www.gchydro.com/pdf/biobizz.pdf).

I use FFOF (amended with dry ferts in in the last transplant) and feed less, particularly in Veg, but also in flowering. I also don't use anything but the Grow and Bloom - and don't PH adjust. I've used the Alg-a-mic, TopMax, and RootJuice in the past, but I'm not convinced of their utility.

Pine

 

[Hydropimp]

Canna is my homie it works trust am on the same program just ph your water first when I do a 5gl mix my tap ph is like around 8 I drop it to around 6.7 and then add the nutes. Make sure you have a good air pump to mix it and you want to keep looking at the ph with what ever meter you have because when you start to feed and the juice start to drop the ph goes up. So I bring it down and then continue to water.

 

[CannaDestroyer]

thats the one pine cone. don't forget the last 3 weeks before harvest only pure water is given. i would add a couple things to hydropimps post. first if you don't use your ferts within ~12 hours, add the air pump. you don't have to, but they start to stink rather quickly if you don't. about ph, it will raise back to starting levels in about 24 hours. you should have used it by then anyway, but if not readjust ph and use. you don't want to constantly readjust ph because ph down adds extra P to your water, this can create an imbalance if done too often. solution is to make enough for one day at time or just add lime to your soil and forget ph all together. only other thing i must mention is if you have soft water you will need to add some cal/mag.

 

[charlesweedmore]

i added dolomite to my soil and i never checked my ph. when should i adjust ph pf water ,before adding nutes or after adding nutes ?

 

[CannaDestroyer]

if you have added lime there is no need to adjust ph. just mix the nutes and water. if you weren't using lime you would adjust ph after adding nutes.