Hey, this is my, um, dresser.
You know, for clothing and stuff. Got some stencil work on there, but still doesn't look out of place. Some shoe boxes and stuff on the top.
Hey, but, what is this ?
It's about 33 inches deep, 23 inches high and 30 inches wide.
For now i've got 3 30W cool white CFLs, tomorrow I'm putting in 3 more cfls, thus I'll have 180W of CFLs in there. And a reflector too.
The original intention was to run a 150W HPS in there, but it got a little bit too hot on my test runs, so until I make some sort of cooltube or air-cooled reflector, this will do.
I made this cab out of an old dresser, I hollowed out the drawers, left only the front planks(?), which I nailed together.
The bottom drawer is still functional, so I will be able to pull the plants out easily, the drawer also functions as a light trap, didn't have to make too much effort to make intakes, they were already there.
Then I painted the inside white, that didn't came out too well, since I was in a bit of a hurry and applied the paint not too evenly. Lightproofing it was a pain in the ass, but somehow I managed to get that done, the front "panel" is removable and held by four furniture-magnet-thingies.
The outtake is handled by the cheapest bathroom fan I could find, which, surprise, surprise, was loud as fuck when I bought it home from the store. So I had to figure an effective way to silence it, and so I did. I really couldn't take any decent pics, but I have to rework it a bit, I'll take some pics when I do that. I silenced the sound with 2 mufflers on both sides of the fan, that i made out of plumbing thermo-isolation pipes, the ones that are basically pipes made out of rockwool - cheap and easy, and muffle really good. And the whole fan is wrapped in a sleeping bag and hidden behind the drawer. It still needs some work, as I did it kind of sketchy, but is does make a LOT of difference - before the fan was like a vacuum cleaner, now it is barely noticeable, about the same noise as a running computer. Speaking of computer fans, there also is a 12V DC fan blowing air at the plants.
I originally intended to order feminized seeds and do a scrog, but I got high before ordering(big mistake there), and assumed that all 5-packs are feminized on the site I was ordering from. So I ordered an unfeminized Delta 9 Stargazer, which came with a freebie pack of Original Haze X Skunk. That kind of messed with my plans.
But anyway it's all good - my new plan is to veg these babies for about 2-3 weeks, then put them on flower, hope for a few females and then LST them.
Currently I have - 5 Stargazers and 5 OH x S and about 15 bagseeds which I'll try to germ and see what happens - not hoping on much from the bagseeds tho - they look kind of green mostly, don't look ready, but I'll see what happens.
Peace,
R
You know, for clothing and stuff. Got some stencil work on there, but still doesn't look out of place. Some shoe boxes and stuff on the top.
Hey, but, what is this ?
It's about 33 inches deep, 23 inches high and 30 inches wide.
For now i've got 3 30W cool white CFLs, tomorrow I'm putting in 3 more cfls, thus I'll have 180W of CFLs in there. And a reflector too.
The original intention was to run a 150W HPS in there, but it got a little bit too hot on my test runs, so until I make some sort of cooltube or air-cooled reflector, this will do.
I made this cab out of an old dresser, I hollowed out the drawers, left only the front planks(?), which I nailed together.
The bottom drawer is still functional, so I will be able to pull the plants out easily, the drawer also functions as a light trap, didn't have to make too much effort to make intakes, they were already there.
Then I painted the inside white, that didn't came out too well, since I was in a bit of a hurry and applied the paint not too evenly. Lightproofing it was a pain in the ass, but somehow I managed to get that done, the front "panel" is removable and held by four furniture-magnet-thingies.
The outtake is handled by the cheapest bathroom fan I could find, which, surprise, surprise, was loud as fuck when I bought it home from the store. So I had to figure an effective way to silence it, and so I did. I really couldn't take any decent pics, but I have to rework it a bit, I'll take some pics when I do that. I silenced the sound with 2 mufflers on both sides of the fan, that i made out of plumbing thermo-isolation pipes, the ones that are basically pipes made out of rockwool - cheap and easy, and muffle really good. And the whole fan is wrapped in a sleeping bag and hidden behind the drawer. It still needs some work, as I did it kind of sketchy, but is does make a LOT of difference - before the fan was like a vacuum cleaner, now it is barely noticeable, about the same noise as a running computer. Speaking of computer fans, there also is a 12V DC fan blowing air at the plants.
I originally intended to order feminized seeds and do a scrog, but I got high before ordering(big mistake there), and assumed that all 5-packs are feminized on the site I was ordering from. So I ordered an unfeminized Delta 9 Stargazer, which came with a freebie pack of Original Haze X Skunk. That kind of messed with my plans.
But anyway it's all good - my new plan is to veg these babies for about 2-3 weeks, then put them on flower, hope for a few females and then LST them.
Currently I have - 5 Stargazers and 5 OH x S and about 15 bagseeds which I'll try to germ and see what happens - not hoping on much from the bagseeds tho - they look kind of green mostly, don't look ready, but I'll see what happens.
Peace,
R