~POST YOUR PIECE~ BONG-BUBBLER-VAPO

[cornflake]

Hey cornflake,, { everyonedoes it . com } carries both roor and ehle. I was eyeing the 500 ml. ehle with notches, only $90. Already have a couple tubes that are similar to it so think I'm gonna wait n get a bentneck though it is a good deal.

14.5 vs. 18.8 is the opening on the joint that you put the downstem into. I used to like 14, now I lean towards 18,, but that's mostly because I use perc tubes and I like the extra flow from the 18 which helps to fill the tube quickly. Personal preference.

Far as bowls go my advice is to make sure you get yourself a nice lil snapper bowl. They have a couple small cone shaped bowls on everyone does it that look like the perfect one hitters.

You should love that roor,, really the perfect all around daily driver.

Should also grab a diffuser while you're at it.

Thanks for the link to everyonedoesit, very nice pricing.

What's a snapper bowl? Got link?

What's a diffuser?

everyonedoesit doesn't have the roor ice 5.0 with 18.8.

Is this a problem? You say it's about how fast the smoke passes through the stem?

I've never tried either. Hmmmm....

I go back and read last couple of pages discussion, pretty sure there's something in there I can learn.

 

[cornflake]

Yes I've learnt I'm too poor lol

But in the instance that in the near future I can organise a little cash, tell me please...

I have been considering a 5mm 45cm ice bong, either roor or ehle, not sure yet but is 37cm too short? There's a considerable saving to drop to that size.

Please also the pipe comes in 3 parts these parts would be? Both the waterpipes I'm considering use same number of parts on website (ie.3).

- bowl/cone?
- body?
- ?

Thanks for sharing and caring

 

[chicalyx]

hey corn, only got time for a quick response for now.

3 parts are: tube itself (bong), the downstem that gets inserted into the tube (which can be diffused), and the bowl that goes into the downstem, which is what the good stuff is loaded into.

Diffused means that instead of a single, large opening on the end of the downstem (on the part that goes under the water) there are several smaller holes, which 'diffuses' the smoke making for a smoother hit. Lotta smaller bubbles instead of few big ones.

I'll give you a link to a snapper later when I got the time. Basically a bowl thats big enough for one hit, so there's no nasty tasting seconds left over. Lotta advantages to loading a snapper over a big bowl that's gonna get hit a few times.

 

[GlassAnGrass]

yea snappers work great for when ur blazing solo.. but if i got all my homies here i for sure use my party worked slider....

worked slider i use for snapper hits...





worked sliders i use for when i have homies over....

I love smokeing The best weed around out of the best glass money could buy!

RooRs RULE!

ps
cant wait to get the hippy ill post many pics i figured it out im gonna order around xmas just due to the simple fact theirs a few products out of stock that i need when i buy my roors so i got to wait till their ready for my order rigth around 600 flat for everything i need! not bad

yea man i feel u b/c it took like a month for my custom roor to make it here...... then after opening box i noticed they made me a 18mm, but i ordered a 14mm.... owell my 18mm is one hell of an ass kicker....

 

[cornflake]

hey corn, only got time for a quick response for now.

3 parts are: tube itself (bong), the downstem that gets inserted into the tube (which can be diffused), and the bowl that goes into the downstem, which is what the good stuff is loaded into.

Diffused means that instead of a single, large opening on the end of the downstem (on the part that goes under the water) there are several smaller holes, which 'diffuses' the smoke making for a smoother hit. Lotta smaller bubbles instead of few big ones.

I'll give you a link to a snapper later when I got the time. Basically a bowl thats big enough for one hit, so there's no nasty tasting seconds left over. Lotta advantages to loading a snapper over a big bowl that's gonna get hit a few times.

Thanks for taking the time chica.

OK, I get ya about a snapper cone, yep I guess I could use one of those but I do like a big single hit that fo sure.

Thanks for explaining diffuser.

The difference between a 14.5 and a 18.8 would be how fast the smoke can be sucked through? It's the diameter of the tube from the bowl to the water?

In an Ice model, it sits above the water on those little ridges?
Is it way harder to clean an ice model?

I've never used an ice model, so aren't I really wasting money buying one?
Do you guys use the ice ability?

Thanks for help, I feel so dumb lol

 

[Mr. Tony]

The only difference with an "ice model" is it has "pinches" or parts of the glass pushed in to hold the ice cubes.

Not any harder to clean at all.


18v14

18 will milk and clear much fast though in my experience 14 allows for more control


just order this set up

http://www.everyonedoesit.com/online_headshop/Roor_Gift_Set__03.cfm?iProductID=2963

everything you need.

 

[cornflake]

Thanks Tony.

I doubt that is in stock though, as they say they're out of that bong with 18.8 for the single piece.

It is a pretty good saving.

What size bowl is it? S, M or L?

I'd still like a couple extra. I guess 18.8 would be good, I prefer a hard fast hit if possible. Hmmmm......

 

[Mr. Tony]

I'm guessing It'll be a medium size bowl.

order this bong

http://www.everyonedoesit.com/onlin...m_Ice_Cylinder_Bong__45cm.cfm?iProductID=5923

and this diffuser

http://www.everyonedoesit.com/online_headshop/Roor_Diffuser_188.cfm?iProductID=1913

( just make sure you order the correct length diffuser)

and you'll be more than extremely ecstatic at how it'll hit.

 

[cornflake]

I'm guessing It'll be a medium size bowl.

order this bong

http://www.everyonedoesit.com/onlin...m_Ice_Cylinder_Bong__45cm.cfm?iProductID=5923

and this diffuser

http://www.everyonedoesit.com/online_headshop/Roor_Diffuser_188.cfm?iProductID=1913

( just make sure you order the correct length diffuser)

and you'll be more than extremely ecstatic at how it'll hit.

I thank you sir, I'm feeling better equipped to make a decision now.

Is there any reason I'd buy a 45cm over a 35cm one? (height)

Roorhead know what size bowl comes when you buy a bong from roor?

 

[GlassAnGrass]

yea i got my Custom ROOR off everyonedoesit.com ... only advice is make sure u list what ever size ur going to get. b/c i ordered a 14mm but got 18mm. an i really didnt want to wait another month.... so just make sure to have ur size listed everywhere......


oyea if ur looking for ROOR worked sliders. this web site has a couple....
http://www.mojosroors.com/?page_id=31


onto my bubbler & bowl i really never use...








just thought lighting was cool on this pic...

 

[Mr. Tony]

I thank you sir, I'm feeling better equipped to make a decision now.

Is there any reason I'd buy a 45cm over a 35cm one? (height)

Roorhead know what size bowl comes when you buy a bong from roor?

I've used the 18" (45cm) ehle and it's very ergonomic. Not to big not to small.

 

[RooR HeaD]

yo whatup gg you like 14.5 over 18 see for me i need 18 i hate the 14.5 just to small for me! yo gg check out the north london hippy and let me know what you think im gonna order soon just waiting for a few upgrade products to come before i order!

 

[GlassAnGrass]

yo whatup gg you like 14.5 over 18 see for me i need 18 i hate the 14.5 just to small for me! yo gg check out the north london hippy and let me know what you think im gonna order soon just waiting for a few upgrade products to come before i order!

man Roor Head my 18mm hits like an monster... some time i got watch out or she'll put me on my ass..... for my 14mm dont use her that much. she doesnt have ice notches an i love my hits cooled b4 toking......

link me to the london hippy i want to see..........

also is www.weedcity.com back up an running????? got my Custom ROOR off everyonesdoeit b/c i was told weedcity is down b/c break up or something........

GG

Bowl of some Bubble for u Roor Head

 

[Mr. Tony]

here is the north london. roor head get it and tell me if it's worth it!

link to the north london
http://www.everyonedoesit.com/onlin...e_northlondonhippy_deluxe.cfm?iProductID=4842

 

[GlassAnGrass]

man that thing is bad ass for sure... thanks for the link Mr. Tony btw....

but thats alott of money for a custom in my mind... dont mind spending lott like that on a Custom, but id rather pick my add ons... but thats just me.....

but for sure thats one really nice Custom ROOR.... like the ice notches that they used... wonder if u can get those on a beaker style bong...

 

[Mr. Tony]

those arn't notches.

 

[GlassAnGrass]

really???? so that tube doesn't have ice down the tube for smooth hits????? those curve's or waves look fresh tho...

 

[Mr. Tony]

cold doesn't necessarily mean smooth.

 

[GlassAnGrass]

cold doesn't necessarily mean smooth.

very tru Mr. Tony..... but there's nothing like a bong filled with ice to help smooth out ur monster hit........

 

[Mr. Tony]

Try snow


God I hate the customs on edit. it's like for every one of them if I could change one aspect I could easily choose.

I've considered ordering a custom but I'm not sure about the wait time.