100w mh mogul base or not?

[mrred]

Is this a mogul base or a regular? one?

 

[greenisgold]

Hard to say because there is nothing to gauge size. Is it bigger then a reg light socket, if so then it's probably a mogul.

 

[mrred]

Oh i didnt know the size was different so i looked it found out its a e26

E5 5mm Midget Screw
E10 10mm Miniature Screw
E11 11mm Miniature Candelabra Screw with cone shape beneath threaded area
E12 12mm Candelabra Screw
E14 14mm European Intermediate Screw
E17 17mm Intermediate Screw
E26 26mm Medium Screw
E27 27mm European Medium Screw
E29 29mm Admedium Screw
E39 39mm Mogul Screw
E40 70mm European Mogul Screw

 

[Koskesh]

all ur base are belong to us!!!

 

[FreezerBoy]

Oh i didnt know the size was different so i looked it found out its a e26

E5 5mm Midget Screw
E10 10mm Miniature Screw
E11 11mm Miniature Candelabra Screw with cone shape beneath threaded area
E12 12mm Candelabra Screw
E14 14mm European Intermediate Screw
E17 17mm Intermediate Screw
E26 26mm Medium Screw
E27 27mm European Medium Screw
E29 29mm Admedium Screw
E39 39mm Mogul Screw
E40 70mm European Mogul Screw

What a great little list! While technically not a link, you should submit this here A Library of Links so it doesn't get lost.

Thanks for sharing. FB

 

[mrred]

For a more complete list..

B = Bayonet Style Bases:
*DC = Double Contact
*SC = Single Contact

Base Code Diameter Description
B7s 7mm SC Bayonet with small ridges on the sides
B9s 9mm Miniature SC Bayonet
BA15d 15mm DC Bayonet with 2 "knobs" on the sides near the bottom of the base
BA15s 15mm SC Bayonet with 2 "knobs" on the sides near the bottom of the base
BAY15d 15mm DC Indexed Bayonet with 2 "knobs" at different heights on the base
BA20s 20mm Flange-style SC Bayonet, rectangular cut-out flanges 1/2 way up base cylinder
BA20d 20mm Flange-style DC Bayonet, rectangular cut-out flanges 1/2 way up base cylinder
B21s 21mm 4-knob SC Bayonet
B22d 22mm DC Bayonet

E = Edison Screw Type Bases:
*Measured outside edge to outside edge on the threaded area

Base Code Diameter Description
E5 5mm Midget Screw
E10 10mm Miniature Screw
E11 11mm Miniature Candelabra Screw with cone shape beneath threaded area
E12 12mm Candelabra Screw
E14 14mm European Intermediate Screw
E17 17mm Intermediate Screw
E26 26mm Medium Screw
E27 27mm European Medium Screw
E29 29mm Admedium Screw
E39 39mm Mogul Screw
E40 70mm European Mogul Screw

G = 2, 3, or 4 Pin Type Bases:
*Pin Spread is measured from the center of one pin to the center of the other
Base Code Pin Spread Description
G4 4mm 2 Pins, .7mm pin diameter, flattened glass base
GU4 4mm 2 Pins, .7mm pin diameter, pins from rectangular back with grooves on MR11
GX4 4mm 2 Pins, .7mm pin diameter, pins from round back on MR11
GZ4 4mm 2 Pins, 1.0mm pin diameter, pins from rectangular back on MR11
G5.3 5.3mm Ceramic block 2-Pin, 1.56 mm pin diameter
GU5.3 5.3mm 2 Pins, .7mm pin diameter, pins from rectangular back with grooves on MR16
GX5.3 5.3mm 2 Round Pins, for Low Volt lamps, 1.53 pin diameter
GY5.3 5.3mm 2 Flat Pins, for Line Volt (120V) or High Volt (such as 82 volts) lamps
G5.3-4.8 5.3mm 2 Flat Blades that are 4.8mm wide x .5mm thick
G6.35 6.35mm 2 Pins, 1.0mm diam pins, flattened glass
G6.35-13 6.35mm 2 Pins, 1.0mm diam pins, 13mm width flattened glass
G6.35-15 6.35mm 2 Pins, 1.0mm diam pins, 15mm width flattened glass
G6.35-20 6.35mm 2 Pins, 1.0mm diam pins, 20mm width flattened glass
G6.35 Ceramic 6.35mm 2 Pins, Ceramic Seal Cover, 1.0mm diam pins, small ceramic cover over flat glass
G6.35/15x19 6.35mm 2 Pins, 1.6mm pin diameter, 15mm x 19mm ceramic block
G6.35/19x19 6.35mm 2 Pins, 1.6mm pin diameter, 19mm x 19mm ceramic block
GY6.35 6.35mm 2 pins, 1.25mm diam pins, flattened glass
GY6.35-13 6.35mm 2 Pins, 1.25mm diam pins, 13mm width flattened glass
GY6.35-15 6.35mm 2 Pins, 1.25mm diam pins, 15mm width flattened glass
GZ6.35 6.35mm 2 Pins, 1.00mm diam pins, from back of MR16 lamp

P = Prefocus Type Bases:
Base Code Diameter Description
P28s 28mm Medium Prefocus, 2 different-sized flanges, single contact
P30s 30mm Candelabra Prefocus base, single contact, circular flange w/ 3 slots
P30d 30mm Candelabra Prefocus base, double contact, circular flange w/ 3 slots
P35s 35mm Prefocus base, flange with 4 square blades, see our catalog p. 18 for diagram
P40s 40mm Mogul Prefocus base, 2 same-sized flanges, single contact
P46s 46mm Bell & Howell Small Indexing Ring, flange in complete circle
P46L 46mm Bell & Howell Large Indexing Ring

R = Recessed Contact Type Bases:
Base Code Diameter Description
R7s 7mm Recessed Single Contact, ceramic ends w/bowl-shaped contact inside each end
R7s-12 7mm-12mm Recessed Single Contact, 7mm ceramic ends w/bowl-shaped contact inside each end with flattened glass 12mm wide
R7s-15 7mm-15mm same as R7s-12 except flattened glass 15mm wide
R7s-18 7mm-18mm same as R7s-12 except flattened glass 18mm wide
R7s-21 7mm-21mm same as R7s-12 except flattened glass 21mm wide

Miscellaneous Base Types:
Base Code Description
Pico 9 Pins arranged in a circle
P14s H1 Base, special shape, see our catalog p. 18 for diagram
PK22s H3 Base, special shape, see our catalog p. 18 for diagram, 1 wire with eyelet
PKY22s H3 Base, special shape, see our catalog p. 18 for diagram, 1 wire with plug
PG22-6.35 2 Pins w/6.35mm diameter, 22mm pin spacing, circular flange w rectangle cutout
X511 H2 base, special shape, see our catalog p. 18 for diagram

from here http://www.mastlight.com/Bases.html