automatic tumblers polinator okief

[cloudz]

I bought the top zeef second hand in a local growshop,think its a 125 micron screen, next days i will ask in the shop if there others screens available.
Yes, may be its the genetic....these j.h. and c.o. goes here around for many years...clones were taken from clones....





cloudz

 

[seebobski]

sorry Chamba
no pics today but I will give complete shopping list

 

[seebobski]

this is the silksreen
polyester Monofilament Fabric, 125 TPI

http://www.dickblick.com/zz434/05/

bbq rotissorie on ebay

osh

1 18 gal tub

2 11 3/4 precut round 3/4 plywood

2 1/2 hardwood dowel 4ft long

2 carragebollt 5/16 1- 1 1/2 long 1- 1/2 long
(not needed if bbq rotissorie has spit rod I got one with a basket)

4 nuts

4 washers

thumb tacs

I had:

3/16 pressboard (plywood would work)
screws
2 bearings (2 round head bolts would work)

 

[Chiefsmokingbud]

What RPM is you motor? When i was building one i got a rotisserie motor and it was like 1 rpm which imo is too slow.

 

[seebobski]

rpms 2.8-3.0 on mine it is slow but it works

 

[WeldFlash420]

Here is my Okiefs tumbler with the 110 nylon tumbler inside. Works great and this run was with Jacks Cleaner II trim. Got nice and blonde and smokes like a lemony fresh dream.

 

[British_Bulldog]

Hi there,

There's always a debate about rotation speed.

In my experience and through my research, 10-15RPM is optimal, but there are always people who swear they get good results with a lot slower / faster.


Peace

 

[Guest]

rpms 2.8-3.0 on mine it is slow but it works

Hi there,

There's always a debate about rotation speed.

In my experience and through my research, 10-15RPM is optimal, but there are always people who swear they get good results with a lot slower / faster.

Peace

I've gotten good results with a BBQ Rotisserie motor on a sloppy DIY

 

[Guest]

I've gotten good results with a BBQ Rotisserie motor on a sloppy DIY

I've done maybe 3 harvests with this and it's already given up.
Maybe it didn't like having it's picture taken!

The weak spot is the rotisserie motor (LOL, why didn't somebody tell me!)

I thought nothing of the warnings of being too slow.
After all, I can just run it for a longer period of time and get a more thorough tumble...until I burn out the motor...

Long story short, I'm in the market for a commercial tumbler...

 

[Chiefsmokingbud]

Sorry to hear man. okief if having a sale, you might hit them up. Just my luck, tumbler I bought 3 years ago is cheaper with the sale than when i bought it. My life story lol

 

[Guest]

Thanks for the heads up, Chief!

If only Bushie could get an "Economic Stimulator" to me before the sale ends...

 

[Chiefsmokingbud]

No doubt, I thought mine was supposed to be here yeaterday because I did direct deposit. But noooo because I had fees taken out I get mailed a check