Announcement

Collapse
No announcement yet.

Labtec's Vertical Madness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Labtec's Vertical Madness

    Hey all, I built a new chamber in my garage. I ended up tearing down my other chamber in my loft because it started to be a sauna up there.

    The chamber is exactly 4ft X 4ft, and utilizes my original ideas from my first vertical chamber (Labtec's 1800 watt vertical Lab). Here is a picture of the floor with a hole for my new intake filter box.



    And a shot of the completed filter box with the filter I'm going to be using.



    A pic of my carbon filter after I hung it. It is not hanging on that piece of wood I have across the chamber, that is going to be used to hang my cables for my light fixtures.



    This was how I attached the panda film to the frame. I designed the whole chamber so that I could tear it down incredibly fast.



    Here is a pic of my completed filter box ready to be installed. Then a shot of what it looks like in the back, and finally a shot of the completed filter box installation.



    I didn't have two long zippers, so I ended up just using one long zipper and one small one. I rigged up a loop with some gorilla tape so that I can hang the door on a screw.



    After installing my shelving system, I put my girls in there. As you can see I have two 600 watt lamps with a fan blowing up. I have 15 girls in there right now. One reveg OG kush, one different OG kush strain that a good friend gave me, 2 Pure Kushes, 2 Lemon Purps, and 9 Super Lemon Haze plants(2 different phenos).



    I plan on vegging for another 2 weeks to fill up the space, then I'll switch to flower. I am using LC's soil mix with recipe one.
    Labtec's 150 watt Lab Labtec's 1800 watt vertical Lab
    Labtec's 2400 watt vertical lab Labtec's 1200 Watt Garage Loft
    Labtec's Vertical Madness GN C99 F2s by Labtec
    sigpic

    #2
    dope. im watching this one.

    Comment


      #3
      Looks like someone else in the vertical section has a thread named "Vertical MADNESS!!!". I knew that name was too good to be true. Sorry Uncle FREEDOM.
      Labtec's 150 watt Lab Labtec's 1800 watt vertical Lab
      Labtec's 2400 watt vertical lab Labtec's 1200 Watt Garage Loft
      Labtec's Vertical Madness GN C99 F2s by Labtec
      sigpic

      Comment


        #4
        Lookin real proper! (:

        Comment


          #5
          Very clever there my friend im just finishing up a shelf system kinda similar vertical is the
          Way ...im subed how are you cooling that room ?

          Comment


            #6
            How about Vertical Supercalifragilisticexpiallado cious"?

            Nice setup Labtec.....rawking the vertical!
            Iron City Seeds

            NextGen Agricultural Consulting & Iron City Seeds


            I grow and am motivated by the pure genius of Heath Robinson!

            The more people I meet the more I like my dog

            Comment


              #7
              Danks Got Dank and Durdy.
              Hey aligee, I'm just using passive intake and cool intake air from my cool garage. With the carbon filter right on top of the lights, the temps stay pretty good,75-82ish.
              Labtec's 150 watt Lab Labtec's 1800 watt vertical Lab
              Labtec's 2400 watt vertical lab Labtec's 1200 Watt Garage Loft
              Labtec's Vertical Madness GN C99 F2s by Labtec
              sigpic

              Comment


                #8
                Cool! Best of luck!
                SD

                Blumats! Automatic watering!

                Vertical Blumat grow

                Blumat adjustment procedure: (for soil)In a bucket ,fill and soak units under water for at LEAST an hour. Then screw on cap( nice and tight!) under water making sure not to trap any air.
                Leave dripper line at ~8cm. long.
                Give the pot a good watering.
                Insert B/M snugly into nicely compacted soil(not too loose) .
                Open till water comes out, carefully close until just a drop barely forms.
                Tighten 1.75 - 2 Arrows
                Adjust as necessary for a few days, then leave it alone!

                "He is your friend, your partner, your defender, your dog. You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart. You owe it to him to be worthy of such devotion." ~ Unknown ~

                Comment


                  #9
                  looking good like always!

                  i'll tag along
                  sigpic
                  R.I.P. Brother Elemental

                  Prop 215 compliant
                  Corpsey's organic room

                  Comment


                    #10
                    Passive intake sweet so you must live in a coooler region to be able to pull that off i use passive also but from air conditioned air Hope you dont mind the questions what is the height of the 1st shelf from the ground?How tall are plant at 12/12 flip ? Thanks .

                    Comment


                      #11
                      Thanks everyone.
                      No worries, questions are always welcome. I just installed the shelves last night, so I'll probably end up moving them down a little bit. But they are a little over 3 feet now. Yeah I do live in a cool environment, Oregon, but my cool garage is the key. Especially since I take my intake air as close to the cold ground as possible. As for the plants, I'll let them get a good foot and half, two feet.
                      Labtec's 150 watt Lab Labtec's 1800 watt vertical Lab
                      Labtec's 2400 watt vertical lab Labtec's 1200 Watt Garage Loft
                      Labtec's Vertical Madness GN C99 F2s by Labtec
                      sigpic

                      Comment


                        #12
                        Nice setup looking to do something similar in about a month. What did you use to attach the poly? You showed a close up but i cant make out what that is? A bolt?

                        Comment


                          #13
                          sorry, Its a roofing nail with a small piece of gorilla tape under it so the panda film wont rip. I didn't nail them in all the way, so that I could take them out fast.
                          Labtec's 150 watt Lab Labtec's 1800 watt vertical Lab
                          Labtec's 2400 watt vertical lab Labtec's 1200 Watt Garage Loft
                          Labtec's Vertical Madness GN C99 F2s by Labtec
                          sigpic

                          Comment


                            #14
                            Fuck yah labtec! Your setups are always awesome, so impressed with what you've done. Good to see you rockin the double shelves again. I remember when you got 3#'s from that last time...let's have a repeat brother! Peace and love, Stagger
                            sigpic"It will take allot more than words and guns...a whole lot more than riches and muscles....the hands of the many must join as 1, and together we will cross the river." Puscifer


                            https://www.icmag.com/ic/showthread.php?t=210839 My 4000W multi strain grow
                            https://www.icmag.com/ic/showthread.php?t=290237 <--- My 6000w E-Papillon grow!

                            Comment


                              #15
                              Jeah labman! Showin how we do it without cool-tubes!

                              Comment

                              Working...
                              X