Announcement

Collapse
No announcement yet.

A perfect cure every time

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by TychoMonolyth View Post
    Isn't 10cfm like a computer fan? That's not enough.

    Air circulation is the goal. Even a small oscillating fan would do. Just point it up the side of a wall. The circulation removes stagnant pockets of humid air within your branches and replaces it with fresh air. Without it, it could mold. It's also important to keep some space between your hanging branches.

    Your buds are working harder than you can imagine. You don't notice it, but they are. Ever stick fresh bud in a garbage bag for a couple hours? Air circulation is very important. Even with hanging drying racks.

    it's actually the 10" hyper fan, dialed down to like 10W LOL

    I did cave and put in a 16" oscillating fan on LOW. because the plants are hung up high I have it pointed to the space below.

    Comment


      I actually do have some fans working off and on with the two dehumidifiers when they are cycling off and on. One is a household type and another is low end commercial. The commercial one blows hard enough it needs to be blocked to avoid drying anything too fast.
      [iframe1]kf4vve-IKuk[/iframe1]

      Comment


        Ouf..
        That's an expensive box.
        .
        ---




        ---


        "All men's souls are immortal, but the souls of the righteous are immortal and divine."
        --Socrates

        Comment


          Originally posted by TychoMonolyth View Post
          Ouf..
          That's an expensive box.
          It’s also an effective step stool/ chair combo, which is oddly left out of its advertising.

          100 pint per day unit for under a grand used to be hard to find, might be better choices out there.

          Got it for a greenhouse which was a mistake, insulation would have been a better use of money in hindsight.
          It’s nice if you move it around a bit, have it in a crawl space now drying up a leaked water heater fiasco. Seems like a unit that could be rented, kind of like the rug doctor of dehumidifiers

          Comment


            The air outside my drying space is rarely over 60% so I have been controlling the humidity in there with a humidity controlled extractor fan. I have some circulation as I feel it's a must, but it's not a breeze upon the buds, it's just to stop the air around them, and more importantly within them, saturating to near 100% while the humidity sensor elsewhere thinks everything is fine. I pack my drying space quite tight you see. Convection currents alone don't offer the air movement I need. I have done extensive testing.

            When my space dips below 60 without extraction, I use a humidifier. This can be as minimal as a tray of water or a cylinder of water with an air stone.


            I have never been ion a position to use a dehumidifier. I have always found them too harsh. The air coming out, simply too dry. Though with more space that extremely dry air need not reach the buds. Some mixing can be done.

            Comment


              DAY 7 UPDATE. So far so good, no musky smell. Hay smell but that is more like tea, and not that musky smell that I have experienced in the past. This smell is part of the drying process I believe. Stems are super bendy still, and there is moisture inside, but outside pretty bone crispy dry on some parts of the plants, I think the colas and tops of the plants more so, not sure why they dry like that.

              ROOM TEMPS 55F/35RH, now that we are in the later stages of the drying process I have turned the circulating fan off.

              Filled up 2 Totes with 6 plants ea, layered between newspaper.

              The other half is still hanging. Will open lids if RH climbs over 65%

              Last edited by PaulieWaulie; 02-15-2021, 22:24.

              Comment


                Y’all really over complicated all of this... the process works flawlessly as described in this thread... I routinely dry and cure 8 to 10 pounds perfectly... drying and curing are two separate steps... it’s so easy to get perfect results with 5 gallon buckets and gamma seal lids...10 to 14 days drying and 8 to 10 weeks curing... you can’t rush the process
                sigpicLife should not be a journey to the grave with intention of arriving safely in a pretty and well preserved body, but rather to skid in sideways in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "WoW What A Wild Ride" - Hunter S Thompson

                GIRL'S GOT SKILLS come check out the thread everyone Strains = Gorilla Bubble 6, Gorilla Berry Diesel, Train Wreck this run.....
                ( https://www.icmag.com/ic/showthread.php?t=336244 )

                i could clock in for very little per hour and turn into a zombie ...no thanks, since i've already been branded BAD by society i'll stick to what i do... QUOTE... STAR CRASH....

                Comment


                  Originally posted by Aspenou812 View Post
                  Y’all really over complicated all of this... the process works flawlessly as described in this thread... I routinely dry and cure 8 to 10 pounds perfectly... drying and curing are two separate steps... it’s so easy to get perfect results with 5 gallon buckets and gamma seal lids...10 to 14 days drying and 8 to 10 weeks curing... you can’t rush the process

                  That's true, but there is so much bad info out there, on ICMAG, YouTube and many others. And people always over-complicate things and/or think they can move the process along faster.


                  I mean, you're right- you dry it and then you cure it, and it's all pretty simple.
                  "you wouldn't know respect if it bit you on the k u n t, douchebag."- justanotherbozo
                  "Negative rep from a tool with a name like Jellyfish is a f'n bage of Honor."- Shalako
                  "You have no fucking idea what you speak of."- Wendull C.
                  "Put me on ignore."- Wendull C.
                  "Lady Gaga is someone on my radar screen."- Hempy McNoodle

                  Comment


                    Originally posted by Aspenou812 View Post
                    ... I routinely dry and cure 8 to 10 pounds perfectly... drying and curing are two separate steps... it’s so easy to get perfect results with 5 gallon buckets and gamma seal lids...10 to 14 days drying and 8 to 10 weeks curing... you can’t rush the process
                    It might help some people that are having difficulties if you describe how you are drying/curing in 5 gal buckets. I'd certainly be interested!
                    I am surprised and embarrassed to be part of the first American generation to leave the country in far worse shape than it was when we came into it. – Hunter S Thompson

                    Comment


                      Originally posted by Old Toker View Post
                      It might help some people that are having difficulties if you describe how you are drying/curing in 5 gal buckets. I'd certainly be interested!

                      Check out this post from about three pages back. https://www.icmag.com/ic/showpost.ph...postcount=2706
                      "you wouldn't know respect if it bit you on the k u n t, douchebag."- justanotherbozo
                      "Negative rep from a tool with a name like Jellyfish is a f'n bage of Honor."- Shalako
                      "You have no fucking idea what you speak of."- Wendull C.
                      "Put me on ignore."- Wendull C.
                      "Lady Gaga is someone on my radar screen."- Hempy McNoodle

                      Comment


                        Originally posted by PaulieWaulie View Post
                        Yes, I rather just get a good dry, and not worry about drying to cure too early at high RH still.

                        I have had nugs that fall off the plant during harvest, and then sit on my hallway floor for a month getting stepped on and dirty, and I have found those nugs turned out way way better than my "curing disasters"!

                        and more than once I noticed that haha, so will wait till stems are snapping before putting in airtight container, and monitor and open if it goes above 60RH immediately.
                        I thought that I was alone in experiencing that too. I'm always finding little nugs under chairs or under dressers when I move them...and they turned out better sometimes than my carefully dried and cured bud. This has me confounded. I would drop small nugs - unknowingly - after harvesting and moving throughout my home and they would roll under stuff. I have found them that were over a year old that looked better, smelled better and smoked better than my carefully attended bud.

                        Comment


                          Originally posted by enter sandman View Post
                          I thought that I was alone in experiencing that too. I'm always finding little nugs under chairs or under dressers when I move them...and they turned out better sometimes than my carefully dried and cured bud. This has me confounded. I would drop small nugs - unknowingly - after harvesting and moving throughout my home and they would roll under stuff. I have found them that were over a year old that looked better, smelled better and smoked better than my carefully attended bud.

                          My guess is those nugs were given the chance to DRY properly before being put in jars. Most people (including me, in the past), try to hurry the drying process. They are in a hurry, or they are nervous about getting their product too dry. So they put it in jars too soon, and then it takes forever for weed to dry in jars.

                          When I put my weed in jars, it is DRY. Dryer than it seems like it should be. But then it miraculously re-hydrates in the jars.
                          You have to make that leap of faith that your weed IS going to re-hydrate in the jars. I believe this is the main cause of 90% of the issues of drying/curing.

                          Also remember- some of the advice being given on weed sites is for commercial growers, whose bottom line (profit) isn't necessarily the same as yours (great weed).

                          Thank you.
                          "you wouldn't know respect if it bit you on the k u n t, douchebag."- justanotherbozo
                          "Negative rep from a tool with a name like Jellyfish is a f'n bage of Honor."- Shalako
                          "You have no fucking idea what you speak of."- Wendull C.
                          "Put me on ignore."- Wendull C.
                          "Lady Gaga is someone on my radar screen."- Hempy McNoodle

                          Comment


                            Originally posted by Jellyfish View Post
                            My guess is those nugs were given the chance to DRY properly before being put in jars. Most people (including me, in the past), try to hurry the drying process. They are in a hurry, or they are nervous about getting their product too dry. So they put it in jars too soon, and then it takes forever for weed to dry in jars.

                            When I put my weed in jars, it is DRY. Dryer than it seems like it should be. But then it miraculously re-hydrates in the jars.
                            You have to make that leap of faith that your weed IS going to re-hydrate in the jars. I believe this is the main cause of 90% of the issues of drying/curing.

                            Also remember- some of the advice being given on weed sites is for commercial growers, whose bottom line (profit) isn't necessarily the same as yours (great weed).

                            Thank you.
                            I think your right... I dry in my flower rooms that are controlled by TrolMaster but I add one piece of equipment... a Fogger set up to add humidity back to the room... 7 days at 65 degrees 70% rh 7 more at 65 degrees 65% rh and it may take an additional week drying to be right the buds will be crispy all the small stem will crack the larger ones will not... but at this point the pot is dry and sitting at an even rh throughout the material... then I start the trim as I trim the pot goes into curing buckets with a caliber rh meter... I check these twice a day and burp as needed... a bucket will hold 2 pounds of pot I also line the buckets with goose bags... you have to burp those buckets in a humidity controlled room too... after about 2 to 3 weeks the pot is sitting at around 62% rh and ready to sell or put up In the freezer... I’ll let the pot sit in the buckets a few weeks at 62% rh and they are perfect... a bud at 62% is a little damp to smoke... grind it up and let it sit in the air for 5 minutes and joints burn slowly and perfectly with a light grey ash... never let the pot see dry conditions and from my experience the most important thing is having a low stable low rh through out the drying material before you attempt the cure... that takes two to three weeks minimum with the plant’s intact... that all happens before I trim... Another thing I’ve noticed I can’t do this without adding moisture back to the rooms and I live in hot muggy Florida... temp and rh control is paramount throughout the process... It takes time but for a real grower taking the time to do it right always pays off the biggest... If I were to crack a container with a few grams in a crowded room the funk just envelops everyone... take your time and add humidity back to your drying rooms and see what happens...
                            sigpicLife should not be a journey to the grave with intention of arriving safely in a pretty and well preserved body, but rather to skid in sideways in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "WoW What A Wild Ride" - Hunter S Thompson

                            GIRL'S GOT SKILLS come check out the thread everyone Strains = Gorilla Bubble 6, Gorilla Berry Diesel, Train Wreck this run.....
                            ( https://www.icmag.com/ic/showthread.php?t=336244 )

                            i could clock in for very little per hour and turn into a zombie ...no thanks, since i've already been branded BAD by society i'll stick to what i do... QUOTE... STAR CRASH....

                            Comment


                              I can do the same thing with jars that you're doing with the buckets, because I don't have the humidity issue you do being in FLA. I still might try the bucket method next time.
                              "you wouldn't know respect if it bit you on the k u n t, douchebag."- justanotherbozo
                              "Negative rep from a tool with a name like Jellyfish is a f'n bage of Honor."- Shalako
                              "You have no fucking idea what you speak of."- Wendull C.
                              "Put me on ignore."- Wendull C.
                              "Lady Gaga is someone on my radar screen."- Hempy McNoodle

                              Comment


                                With quart jars, it's not so deep, and slightly drying the top layer isn't so bad because the humidity from the bottom buds will migrate up through the cure. With totes, you flip them, with buckets it's different and can't fill them so much.

                                The only danger to using buckets and you are burping them by hand, is filling them too much. How much is too much? It depends on whether it's a tight indica or loose sativa. But with a manual burp, I'd say 2 lbs like Aspenou812 said. That would be about half a bucket.
                                .
                                ---




                                ---


                                "All men's souls are immortal, but the souls of the righteous are immortal and divine."
                                --Socrates

                                Comment

                                Working...
                                X