Announcement

Collapse
No announcement yet.

The Garden Groom = A trimming machine for 3 pymts of $33 ???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    That's GREAT news, SG!



    I'm having "issues" cutting "slots" in the HC.
    It's a little tedious...and raggy.

    And,
    the 1/2" HC seems a bit too large.
    And,
    the 1/4" HC seems a bit too small.



    ...looking at the trimpro website...

    Model # : TRIM-BOX
    8,6" diameter
    (I assume 8,6" = 8.6")

    GRATES
    Grate 1: Large slots only (STANDARD) (slots 7/16")
    Grate 2: Small slots only (slots 5/16")


    7/16" slots = a little less than 1/2"



    5/16" slots = a little more than 1/4"


    If a fella was to get one, which one???

    Not that I'm giving up trying to diy a grill.
    ... yet...
    Last edited by Peat; 08-13-2009, 03:14.

    Comment


      i like the standard trimbox grate thus far, but i haven't tried another one...

      Comment


        The standard is the large (7/16"), correct?

        Comment


          I think someone mentioned earlier about trimming dry trim.

          Just thought I'd mention that trimpro says,
          "All our trimmers are designed to be used with freshly harvested plants."

          And, the GG is designed as a live plant hedge trimmer.

          Comment


            Hey Peat, i'm sure the wet/dry issue isn't all that big of one....

            I was just throwin' the motor speed thing out there as something else to "tweak" with....

            Are the motor speeds variable on the larger comm. units ?

            Anybody ? Just curious for my own sake really....



            Nice work Guys
            Last edited by iGro4Me; 07-28-2009, 19:53. Reason: Just high :-)
            sigpic

            Originally Posted by 808kahumai:
            P.S. The glasses are a very important part of giving/receiving a proper facial! I am willing to admit my fetish
            ~Heal Me~



            Build, Work, Dream, Create....That IS the American way

            Comment


              cant wait to actually see someone trim a damn bud !





              [in my english junkyard wars accent] ....

              Attention Stoners: you have 1 day, I repeat 1 day before your time is up!

              Comment


                Originally posted by iGro4Me View Post
                Hey Peat, i'm sure the wet/dry issue isn't all that big of one....

                I was just throwin' the motor speed thing out there as something else to "tweak" with....

                Are the motor speeds variable on the larger comm. units ?

                Anybody ? Just curious for my own sake really....



                Nice work Guys

                Originally posted by Greyskull View Post
                nah no dif speed settings. just LOUD

                LOL Lil Wayne!
                I done re-circumsized myself and you still want more!

                I won't have anything to trim for another month, or so...

                Comment


                  Originally posted by LiLWaynE View Post
                  cant wait to actually see someone trim a damn bud !





                  [in my english junkyard wars accent] ....

                  Attention Stoners: you have 1 day, I repeat 1 day before your time is up!
                  I hear ya! Believe me, I've been as ancy as you...jerk hadda ship mine cheapo 1+ week style...........But I've been hustlin since I got it!!! We're gonna bring it!

                  We'll do it tonite!!!!! I've got a little bit of green crack ready to harvest, but i didn't take care of it, as I'm in between grow rooms...

                  So I'll do some trimmin tonite but you gotta promise not to make fun of little crappy nugs..I'll have some good ssh in a week to trim too, this green crack was just to get me through for a little...

                  In progress messing around pic to come in a minute

                  Comment


                    I've got some Musc Mash thats been on the line for about a week & has been rough trimmed already.

                    I'll give it a go.

                    Thanks for the kick in the ass, LW!


                    EDIT
                    Cant let the newb beat me out!

                    LOL

                    (No fair, "hustling"! )
                    Last edited by Peat; 08-13-2009, 03:15.

                    Comment


                      Watch out then here comes the newb!!!!!

                      here is the mesh attached to the screws w washers, You can see how i snipped some of the grate off the bottom half to open in up to more straight grates....so we got two grates in one...





                      Just to get a better look at the cutting area....

                      Comment


                        Nice!

                        Well, if yours runs, you got me beat!

                        Mine doesnt.

                        Musta crossed a wire???
                        Although, I didn't mess with the wires...

                        Lemme give it another look...

                        Comment


                          This is getting GOOD! You guys are bad ass!!!

                          Comment


                            Crap that last pic was blurry sorry.....Yep mine works!!!!


                            Here you can see how close the cutting blade is to the grate....Anybody with a trimpro or similar that could take a similar measurement between the blade and top to the grate???? This might give me more idea of if I need to adjust it....

                            If it needs to be further away, I think simply using more washers underneath the grate could let you find adjust it easily....






                            Now for the mounting
                            I was gonna mess with a table and permanent mount it, but I'm seeing theres no need to.... a pair of sawhorses and a few bungee cords are plenty...It's "solid enough" as it is, but I'm gonna grab a few more bungees before it's debut tonight....

                            And bagging...the "deal" I got didn't have the awesome auger or the other freebie but it DID come with the extra volume collection bag..I shortened the area it has to travel to get to the bottom of the bag and rubber banded it to the plastic collection tube that comes with it for outboard collection.... This tube can just as easily be led into wherever you want to collect your clippings...TOO EASY!!!!




                            NOT BAD FOR A NOOB yeeeee hawwwww...

                            Gonna get high with a buddy, go get a few clamps to keep it on (will be very easy like Peat said), then prolly do some trimming

                            Comment


                              I'm having connection problems too.

                              BTW, It wont run if you don't have a catcher installed.

                              Problem solved.

                              Too bad I took it apart again before I figured that out.

                              Lemme get back at it

                              Comment


                                SHIT!

                                Nice rig, newbie!

                                Comment

                                Working...
                                X