What's new
  • Please note members who been with us for more than 10 years have been upgraded to "Veteran" status and will receive exclusive benefits. If you wish to find out more about this or support IcMag and get same benefits, check this thread here.
  • Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!

Auto Durban x Auto Duck F1 - Bx To Duck

NeDank

Active member
Here is the first harvest. I'm letting it dry out a bit more maybe another day.

100_0856.JPG
 

NeDank

Active member
Last night I had the first sample from Durban x Duck. Man was it good. Heavy eyes not to racy not to sedative just right.
 

NeDank

Active member
Auto Duck is going to take longer than Durban x Duck to finish. DxD could be harvested now as the seeds are ripe and so are the buds. Here's a couple pics of auto duck

100_0873.JPG
100_0872.JPG


Lots of white pistols still although the pic doesn't show this well
 

NeDank

Active member
Here is some Durban x Duck drying
The pot with two fems weighed 80 grams total and the other weighs 53g plus I got 40 grams of small larf and seeds. Now I just need to figure out how to seperate the seeds from the leaf/larf.

100_0876.JPG
 

fuutang

Member
Auto Duck is going to take longer than Durban x Duck to finish. DxD could be harvested now as the seeds are ripe and so are the buds. Here's a couple pics of auto duck



Lots of white pistols still although the pic doesn't show this well

You still have time to enhance the yield of your plants. Look at this. :biggrin::biggrin::biggrin::biggrin::biggrin:

Home LED's (see below) are a very quick fix to enchance flowering and resin production. This is real, not something I heard. They also stop height gain where height is an issue. I tried home LED's on some CFL vegged plants that were shooting beyond my grow space height. Thanks to blynx, the LED's made my plants stop stretching and produce loads more buds and resin, almost like the pro's who post unbelievable images of resin laden plants here on ICmag, that look like they could be airbrushed-fakes. I now know they are not fake, and I realise this was a matter of my lamps were lacking in certain light bandwidths or light-colour. Home LED's added the extra colour needed. The LED's I chose were cheap low wattage 6watts bulbs. I only needed a handful of the Red (Warm white) home LED's, and the whole of the plants started budding right out. Although the LED's stopped the plants stretching, the yield hasn't depreciated, and my plants still produced a full yield. I originally flowered the plants using just the home-LED's. But later I added a 200w Red CFL for more lumens and this worked fine in tandem. Some of the guys are using commonly available 11watts plus home LED bulbs, so a bit more powerful. If you want to risk gettin these, you will get more lumens, although I am not able to recommend any other brands than ULTRABRITE below. However, when clustered together, 'literally ANY' home LED's can make significant wattage and lumens. So string a few together. Five would be good starting point. Get them over the top of those ladies to stop the stretching, and producing more buds and resin. Wilko have a 2m clip on light for £4, which includes a fused plug. IMO, even one home-LED will improve your light bandwidth or light-colours.

You will never worry about stretching again. Once your plants are tall enough and you want to stop stretching and start flowering, you simply add some home LED's and the stretching stops, flowering and resin starts. As you can see, lamp-holder fittings are negligible, and can be bought from £1.50. If you want to wire them, they just need wire and a plug. I appreciate this stuff can mount up to the cost of a proper lamp. But for a few pounds, you can quickly stop stretchy plants becoming unviable. This might even save your grow, if using a closet. I can only recommend the ULTRABRITE brand home LED's pictured below, though I am told squat plants are a common trait for Red home LED's; except that Blue LED's stretches them more, but they still squat by normal standards. Some of the guys, like blynx, use Blue-home-LED's to stretch plants before flowering, cus the plants are too squat using just Red LED's. Heh, hehh, too squat! Can you believe this; You probably will? I was putting off getting a full blown LED lamp cus of the problems I had with CFL's over the years, causing stretching, over-veggin and poor flowering. Then I bought a Maxibright CFL lamp that induces flowering in 10 days. But after producing tiny plants, the alarm bells began to ring. Would I ever get a decent routine CFL grow. I thought that a purpose made Grow-LED would be more trial and error. I have been looking everywhere for reviews of purpose made LED grow lamps. There were only a few reviews of any use at all. Suddenly blynx amazing intellect entered, and home LED's were given a try. Then the epiphany; a moment of sudden and great revelation or realization! At last, I can stop the plants stretching basically whenever I want. Home LED's are very cheap too, from £1; and to make more lumens everyone is taking the filter-caps off; which leads to some scary electric shock hazards from the 240volt pins, inappropriately placed, and sticking out of the centre of the home LED's. Like, you were workin, and put your hand too near, Ouch!!!__ But if you can deal wif dat, then you can fit anything in your 5' space.

The reason for increased lumens by taking the filter-caps off home LED's, is well explained here, in;
Why I Break The Diffuser Off My LED "Bulbs" For My Grow Light Panels https://youtu.be/JG_iXOIb1tk



Google the ULTRABRITE brand or go here to Poundland: https://www.poundland.co.uk/399087-u...-round-1-pack/
https://www.icmag.com/filedata/fetch?id=17826220&d=1617762882https://www.icmag.com/filedata/fetch?id=17826221&d=1617762905
https://www.icmag.com/filedata/fetch?id=17830181&d=1618177146

Home LED bulbs are £1 each in Poundland (or anywhere). https://www.poundland.co.uk/catalogs...t/?q=light+led


blynx is using home LED's here, with their noteable filter-caps removed, which can be unrecognisable to the untrained eye. Note the squatness of the plant, which may also have been stretched using some Blue-home-LED's. The following pic shows final growth from a single plant. Blnyx's LED CAB space concept deliberately ties plants down to encourage side growth, maximising yield from a single plant, while side growth is also very short and squat, especially under Red home LED's. The side growing plants become full size colas, like clones, but without the cutting. You can see more of blynx posts here: https://www.icmag.com/forum/marijuan...0#post10943498 and here https://www.icmag.com/forum/marijuan...4#post10869164


fetch?id=17806112&d=1616019132.jpg
 

fuutang

Member
Originally posted by NeDank View Post

...the seeds are ripe and so are the buds.

May be too late. But you know how they can always go on that little bit longer? And as the pistels are still white. You have a good chance of enhancing this grow.
 

NeDank

Active member
May be too late. But you know how they can always go on that little bit longer? And as the pistels are still white. You have a good chance of enhancing this grow.

You're right the Duck could go another week or two with nutrients. She's definitely more of a skunk type plant than her sister from last grow. After looking at her again I'll feed next watering. However, Durban x Duck F1 are at the end of flowering stage and will be chopped soon.
 

NeDank

Active member
You still have time to enhance the yield of your plants. Look at this. :biggrin::biggrin::biggrin::biggrin::biggrin:

Home LED's (see below) are a very quick fix to enchance flowering and resin production. This is real, not something I heard. They also stop height gain where height is an issue. I tried home LED's on some CFL vegged plants that were shooting beyond my grow space height. Thanks to blynx, the LED's made my plants stop stretching and produce loads more buds and resin, almost like the pro's who post unbelievable images of resin laden plants here on ICmag, that look like they could be airbrushed-fakes. I now know they are not fake, and I realise this was a matter of my lamps were lacking in certain light bandwidths or light-colour. Home LED's added the extra colour needed. The LED's I chose were cheap low wattage 6watts bulbs. I only needed a handful of the Red (Warm white) home LED's, and the whole of the plants started budding right out. Although the LED's stopped the plants stretching, the yield hasn't depreciated, and my plants still produced a full yield. I originally flowered the plants using just the home-LED's. But later I added a 200w Red CFL for more lumens and this worked fine in tandem. Some of the guys are using commonly available 11watts plus home LED bulbs, so a bit more powerful. If you want to risk gettin these, you will get more lumens, although I am not able to recommend any other brands than ULTRABRITE below. However, when clustered together, 'literally ANY' home LED's can make significant wattage and lumens. So string a few together. Five would be good starting point. Get them over the top of those ladies to stop the stretching, and producing more buds and resin. Wilko have a 2m clip on light for £4, which includes a fused plug. IMO, even one home-LED will improve your light bandwidth or light-colours.

You will never worry about stretching again. Once your plants are tall enough and you want to stop stretching and start flowering, you simply add some home LED's and the stretching stops, flowering and resin starts. As you can see, lamp-holder fittings are negligible, and can be bought from £1.50. If you want to wire them, they just need wire and a plug. I appreciate this stuff can mount up to the cost of a proper lamp. But for a few pounds, you can quickly stop stretchy plants becoming unviable. This might even save your grow, if using a closet. I can only recommend the ULTRABRITE brand home LED's pictured below, though I am told squat plants are a common trait for Red home LED's; except that Blue LED's stretches them more, but they still squat by normal standards. Some of the guys, like blynx, use Blue-home-LED's to stretch plants before flowering, cus the plants are too squat using just Red LED's. Heh, hehh, too squat! Can you believe this; You probably will? I was putting off getting a full blown LED lamp cus of the problems I had with CFL's over the years, causing stretching, over-veggin and poor flowering. Then I bought a Maxibright CFL lamp that induces flowering in 10 days. But after producing tiny plants, the alarm bells began to ring. Would I ever get a decent routine CFL grow. I thought that a purpose made Grow-LED would be more trial and error. I have been looking everywhere for reviews of purpose made LED grow lamps. There were only a few reviews of any use at all. Suddenly blynx amazing intellect entered, and home LED's were given a try. Then the epiphany; a moment of sudden and great revelation or realization! At last, I can stop the plants stretching basically whenever I want. Home LED's are very cheap too, from £1; and to make more lumens everyone is taking the filter-caps off; which leads to some scary electric shock hazards from the 240volt pins, inappropriately placed, and sticking out of the centre of the home LED's. Like, you were workin, and put your hand too near, Ouch!!!__ But if you can deal wif dat, then you can fit anything in your 5' space.

The reason for increased lumens by taking the filter-caps off home LED's, is well explained here, in;
Why I Break The Diffuser Off My LED "Bulbs" For My Grow Light Panels https://youtu.be/JG_iXOIb1tk



Google the ULTRABRITE brand or go here to Poundland: https://www.poundland.co.uk/399087-u...-round-1-pack/
https://www.icmag.com/filedata/fetch?id=17826220&d=1617762882https://www.icmag.com/filedata/fetch?id=17826221&d=1617762905
https://www.icmag.com/filedata/fetch?id=17830181&d=1618177146

Home LED bulbs are £1 each in Poundland (or anywhere). https://www.poundland.co.uk/catalogs...t/?q=light+led


blynx is using home LED's here, with their noteable filter-caps removed, which can be unrecognisable to the untrained eye. Note the squatness of the plant, which may also have been stretched using some Blue-home-LED's. The following pic shows final growth from a single plant. Blnyx's LED CAB space concept deliberately ties plants down to encourage side growth, maximising yield from a single plant, while side growth is also very short and squat, especially under Red home LED's. The side growing plants become full size colas, like clones, but without the cutting. You can see more of blynx posts here: https://www.icmag.com/forum/marijuan...0#post10943498 and here https://www.icmag.com/forum/marijuan...4#post10869164



I am currently growing with 55w leds from http://cobshop.net
 

fuutang

Member
You're right the Duck could go another week or two with nutrients. She's definitely more of a skunk type plant than her sister from last grow. After looking at her again I'll feed next watering. However, Durban x Duck F1 are at the end of flowering stage and will be chopped soon.

Are you using a dual spectrum LED? IMO, you should be getting more buds and tighter colas. Everyone likes to stand by their lamps, so I don't mean to dissapoint. But all is not lost. Simply add supplemental-light with home-LED's . Home LED's as supplemental-light get more resin as well, like the pros pics on ICmag. Be careful if you take the caps off due to electric shock hazzard from pins which stick out the LED motherboard. Try flowering with home-LED's alone, and you will see what I mean.
user508366_pic2112382_1611166306.jpg
 

NeDank

Active member
Here's a few pics of whats going on now

100_0883.JPG
100_0884.JPG
100_0885.JPG


The pot that hasn't sprouted yet is 5 Guerilla Gold #2 looking for autoflower traits
 

NeDank

Active member
Timmmmmber Auto Duck is coming down tonight or tomorrow. That will wrap up this grow journal.
 

NeDank

Active member
I got rid of the GG#2 (have 20 more seeds) and planted some Lowryder #2 seeds in big fountain soda cups to see if I can get like a foot long bud from each fem instead of big plants. Also planted 4 Azure Rocket in a 5 gallon fabric pot to test them out. Sour 60, Red Poison, and Burning Kush auto's are all doing really well except one Red Poison is yellow a bit and shorter than her sister growing much slower. The main goal for this run is to pollinate a hopefully purple Red Poison with Sour 60 pollen. Everything else will be for smoke.

When Auto Duck is dry I'll make a new thread for the new strains.
 

Latest posts

Latest posts

Top