<PICTURES START ON PAGE 7!!!>
Here my exact dimensions:
17.5 x 31.5 x 33.5 inches
44.5 x 80 x 85.1 cm
18466.875 cubic inches
302956 cubic cm
3.82 square footprint
Lights-
2x 42watt CFL's
4x 23watt CFL's
176watts Total
46.07watts per square foot(just under the limit )
Hey guys I will be updated this first post here and there, probably daily if not weekly for sure. Here are 2 pics I have of my baby already. She is in 11/13 atm soon to be changing it to 12/12 as standard. in the main pic you can see the purpling of the stems pretty bad, this is only concern I have.
Here you can see the sex is pretty clear Thought i had 2 girls but one turned out to be a male instead O well
Heres a picture of the whole gal with a little size reference for ya. Isnt that big but the grow area can surely handle 2 to 3 of these babies no problem, maybe even 4 if i use some good training. This picture really doesnt
give her the justice she deserves, she doesnt look that GREAT here, but ill
for sure post new ones tomorrow, once lights kick back on
Right not the lights are off on my babies, and wont be on for another 10 or so hours. Ill be sure to post pics of the total cab and some of the things iv done and what im still planning on doing.
I think this weekend I going to install my CO2 feed lines, and build my scrubber possibly. Right not im currently working on new bucket setup and was thinking of having 3 buckets, 2 for plants and 1 for res, and another larger bucket for the main refill res. Not quiet sure if I will be worth it or not but well see. The only delema im having atm is how I am going to go about making lids for these here new buckets i got, that are perfect for my area.
Whole bucket(mini-garbage can really)
Length of opening is about 10inches END to END about 8.5in on inside
Width of opening is about 8in END to END about 6.5in on inside
They are about 10inch tall or deep..
Here are come pictures of the 2 and there different air line setups... I dont use air stones or wands, they always clog up on me, I just seal the end with little torch then poke 4 holes where I want, then test it with water and the air pumps then modify what hole I need to to get even bubbles as possible.
sorry for such huge ass pictures Ima retaking them not at lower Resolution, crazy phone takes some good pic if you ask me lol. Gota love BlueTooth
Ok changed some of the pics to make the post a little more manageable. But didnt feel like retaking the ones with water.
Tell me what you guys think so far, and what you think i should do for lids..
Here my exact dimensions:
17.5 x 31.5 x 33.5 inches
44.5 x 80 x 85.1 cm
18466.875 cubic inches
302956 cubic cm
3.82 square footprint
Lights-
2x 42watt CFL's
4x 23watt CFL's
176watts Total
46.07watts per square foot(just under the limit )
Hey guys I will be updated this first post here and there, probably daily if not weekly for sure. Here are 2 pics I have of my baby already. She is in 11/13 atm soon to be changing it to 12/12 as standard. in the main pic you can see the purpling of the stems pretty bad, this is only concern I have.
Here you can see the sex is pretty clear Thought i had 2 girls but one turned out to be a male instead O well
Heres a picture of the whole gal with a little size reference for ya. Isnt that big but the grow area can surely handle 2 to 3 of these babies no problem, maybe even 4 if i use some good training. This picture really doesnt
give her the justice she deserves, she doesnt look that GREAT here, but ill
for sure post new ones tomorrow, once lights kick back on
Right not the lights are off on my babies, and wont be on for another 10 or so hours. Ill be sure to post pics of the total cab and some of the things iv done and what im still planning on doing.
I think this weekend I going to install my CO2 feed lines, and build my scrubber possibly. Right not im currently working on new bucket setup and was thinking of having 3 buckets, 2 for plants and 1 for res, and another larger bucket for the main refill res. Not quiet sure if I will be worth it or not but well see. The only delema im having atm is how I am going to go about making lids for these here new buckets i got, that are perfect for my area.
Whole bucket(mini-garbage can really)
Length of opening is about 10inches END to END about 8.5in on inside
Width of opening is about 8in END to END about 6.5in on inside
They are about 10inch tall or deep..
Here are come pictures of the 2 and there different air line setups... I dont use air stones or wands, they always clog up on me, I just seal the end with little torch then poke 4 holes where I want, then test it with water and the air pumps then modify what hole I need to to get even bubbles as possible.
sorry for such huge ass pictures Ima retaking them not at lower Resolution, crazy phone takes some good pic if you ask me lol. Gota love BlueTooth
Ok changed some of the pics to make the post a little more manageable. But didnt feel like retaking the ones with water.
Tell me what you guys think so far, and what you think i should do for lids..
Last edited: